博客
关于我
redhat6.9安装oracle11.2.0.4 PRCF-2010
阅读量:443 次
发布时间:2019-03-06

本文共 3952 字,大约阅读时间需要 13 分钟。

redhat6.9安装oracle11.2.0.4 执行root.sh脚本,发现scp文件至节点2无法传输报错

INFO: /tmp/OraInstall2020-05-04_11-56-08PM/mvstubs.shINFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.WARNING: Error while copying directory /u01/app/11.2.0/grid with exclude file list '/tmp/OraInstall2020-05-04_11-56-08PM/installExcludeFile.lst'  to nodes 'wsgw2'. [PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one remote node to send the installer files!PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one  remote node to send the installer files!]Refer to '/u01/app/oraInventory/logs/installActions2020-05-04_11-56-08PM.log' for details. You may fix the errors on the  required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to proceed. Click 'No'  to exit the install. Do you want to continue?

查询MOS

Linux: GI installation fails as bindv6only is set to 1: "PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer" (Doc ID 1999296.1)    The firewall is disabled and hence not the cause of the connections being refused虽然版本不太匹配,MOS是12.1 但是其中有关于ip6tables!!!root@node1:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node1:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running.root@node2:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node2:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running. SOLUTIONThe issue is caused by the kernel parameter net.ipv6.bindv6only being set to 1 as seen belowgrid@node1:~> sysctl net.ipv6.bindv6onlynet.ipv6.bindv6only = 1grid@node1:~>The solution is to set net.ipv6.bindv6only to 0 and install the Grid Infrastructure softwarenode1:~ # sysctl net.ipv6.bindv6only=0net.ipv6.bindv6only = 0node1:~ #

实际环境检测

系统安装redhat6.9 防火墙已关闭,但是对于ipv6的服务并未关闭!!! 因此是这个问题导致的,关闭ipv6服务后,ok  两个节点都要操作 [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/iptables statusiptables: Firewall is not running.[root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]#  sysctl -a|grep -i 'ipv6'|grep 'disable'net.ipv6.conf.all.disable_ipv6 = 0net.ipv6.conf.default.disable_ipv6 = 0net.ipv6.conf.eth0.disable_ipv6 = 0net.ipv6.conf.eth1.disable_ipv6 = 0net.ipv6.conf.lo.disable_ipv6 = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables statusTable: filterChain INPUT (policy ACCEPT)num  target     prot opt source               destination         1    ACCEPT     all      ::/0                 ::/0                state RELATED,ESTABLISHED 2    ACCEPT     icmpv6    ::/0                 ::/0                3    ACCEPT     all      ::/0                 ::/0                4    ACCEPT     udp      ::/0                 fe80::/64           state NEW udp dpt:546 5    ACCEPT     tcp      ::/0                 ::/0                state NEW tcp dpt:22 6    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain FORWARD (policy ACCEPT)num  target     prot opt source               destination         1    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain OUTPUT (policy ACCEPT)num  target     prot opt source               destination         [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables stopip6tables: Setting chains to policy ACCEPT: filter         [  OK  ]ip6tables: Flushing firewall rules:                        [  OK  ]ip6tables: Unloading modules:                              [  OK  ][root@wsgw1 CVU_11.2.0.4.0_grid]# chkconfig --level 35 iptables off [root@wsgw2 CVU_11.2.0.4.0_grid]#  /etc/init.d/ip6tables statusip6tables: Firewall is not running.

 

转载地址:http://dtlyz.baihongyu.com/

你可能感兴趣的文章
mysql5.7免费下载地址
查看>>
mysql5.7命令总结
查看>>
mysql5.7安装
查看>>
mysql5.7性能调优my.ini
查看>>
MySQL5.7新增Performance Schema表
查看>>
Mysql5.7深入学习 1.MySQL 5.7 中的新增功能
查看>>
Webpack 之 basic chunk graph
查看>>
Mysql5.7版本单机版my.cnf配置文件
查看>>
mysql5.7的安装和Navicat的安装
查看>>
mysql5.7示例数据库_Linux MySQL5.7多实例数据库配置
查看>>
Mysql8 数据库安装及主从配置 | Spring Cloud 2
查看>>
mysql8 配置文件配置group 问题 sql语句group不能使用报错解决 mysql8.X版本的my.cnf配置文件 my.cnf文件 能够使用的my.cnf配置文件
查看>>
MySQL8.0.29启动报错Different lower_case_table_names settings for server (‘0‘) and data dictionary (‘1‘)
查看>>
MYSQL8.0以上忘记root密码
查看>>
Mysql8.0以上重置初始密码的方法
查看>>
mysql8.0新特性-自增变量的持久化
查看>>
Mysql8.0注意url变更写法
查看>>
Mysql8.0的特性
查看>>
MySQL8修改密码报错ERROR 1819 (HY000): Your password does not satisfy the current policy requirements
查看>>
MySQL8修改密码的方法
查看>>